테프론 원료 기본
테프론 원료 선택 가이드
| 요구 특성 | Good | Better | Best |
| 내화학성 | One coat | ETFE or FEP | PFA |
| 내식성 | One coat | ETFE or FEP | PFA |
| 내마모성 | PTFE or FEP | One coat | ETFE or PFA |
| 내열성 | One coat | FEP | PTFE or PFA |
| 이형성(비점착성) | One coat | PFA | PTFE or FEP |
Performance Positioning for Corrosion Protection*
(내화학성 요구 정도에 따른 코팅 시스템 제안)
Teflon™ One Coat
These water-based and solvent-based liquid coatings are formulated with special blends of fluoroplastics and other high-performance resins to improve toughness and abrasion resistance. Because the film com- ponents stratify during baking, most of the fluoroplastic properties (such as low friction and nonstick character) are retained. The resins provide adhesion and abrasion resistance. These products can some- times be applied to smooth, clean metal. Bake requirements vary, depending on the specific coating.
Product Proposition
Application Examples
Application examples of ruby system
Acid and solvent penetration resistance Used for agitator protection when organic solvent reacts with acid at 120°C
Filter housing
Mixture of methylbenzene and acid at 90°C
Liquid ring pump
Ordinary chemical protection
Filter housing with hot acid resistance
Including HCI and acetone, FDA
Oil separator containing steam
EFTE system with acid and water vapour
permeation resistance and filling
Vessel without flange
ETFE system which inner coat thickness is 1 mm
